Enclosed belt conveyor ZEO-BCE

The bulk material is loaded into the charging hopper of the conveyor belt and transported by the load-bearing conveyor mechanism, the belt, to the discharging area. The belt is supported by a roller carriage and set in motion by a driving device. Technical features: -Absence of extra charges on design, installation and usage of aspirational equipment. -Absence of extra charges on design, installation and usage of conveyor catwalks. -The enclosed constructive of the conveyor is safety and doesn’t need any extra walling. -Absence of extra charges on dedusting cover or on cover from athmospherical condensation. -The improved design of rollers with free flange bearing, that removed from dusting zone. -Compact dimension size of drive head of the conveyor due to binding of gear-motor drive on torque rod. -Using the gear-motor drives class IE-2 produced by leading European manufacturers, that let to increase the specified run to 28 000-30 000 hours and to increase the energetic potential of the conveyor on 7-9% according to raise on 100% efficiency of gear-motor drive. -The special design of the conveyor doesn’t need any belt cleaning systems, because all the material returns into the main transport flow. -Using the fettle of high-wear part s of discharge box with constructive sheet steel Steel Pro or polyurethane Elasturan 6025. -Using of partial execution mode of transportation with low speeds(not more than 2.5m/s) and special calculated discharging system let to decrease the breakage of product on 1.5-2%. Technical specifications: -Capacity, (t/h) - 50, 100, 175, 250, 350, 500, 600, 1200, 1500 -Length, (m) - from 5 to 250 -Wattage, (kWt) - from 1,1 to 135