EMC300A Testsystem

EMC300A test system Including 1 unit of EMC300A, 1 unit of EMC200A,with two 500W isolation transformer, 1 unit of isolation transformer and a computer (self supply). More and more attention has been drawn to the Electromagnetic compatibility of electrical and electronic products, especially in the developed countries in Europe and America, it is enforced. It was quite hard for many exportation enterprises before due to lack of proper professional testing instrument; not only they spent lots of human and material resources, but also the development progress of products was influenced. Now, no more trouble in it! The successful development of EMC300A Electromagnetic compatibility & conducted Interference Testing system will make your job easy. Specifications 1.Measure the PK, QP and Av, with the rang: 9kHz 150kHz:20dBµV 130dBµV; 150kHZ 30MHZ:10dBµV 90dBµV; 2.Frequency scanning range: 9kHZ 150kHZ (Band width: 200HZ); 150kHZ-30MHZ (Band width: 9kHz); 3.Frequency scanning step length: 9kHZ-150kHZ: 100HZ/200HZ/400HZ; 150kHZ-30MHZ: 5kHZ/10kHZ/20kHZ; 4.Scanning interval: 50ms/100ms/200ms (9kHZ-150kHZ), 5ms/10ms/20ms(150kHZ-30MHZ). 5.basic accuracy of receiver: ±3dBuV; 6.Input resistance 50Ω, Max. input signal 2V, and it is protected at 5V; 7.it uses 50Ω/50µH+5Ω single phase V-type simulative power supply network according to CISPR standard; 8.meet the test requirements of the standards such as FCC, EN55022, GB17743 etc, and the standard can be set freely, for the convenience of customer; 9.this system provides Chinese and English application software, it must communicate with a PC (computer) when operating, all the data and curves will be displayed directly by the computer, it operates under Windows98/2000/XP,.