Embedded Transformator

Mingtong series S11 and S13 of embedded transformer (10kV, 10-2000kVA) were based on the state-of-the-art technology of GE and optimized by utilizing our unique process and fixtures. They feature low loss, silence, good short-circuit resistance, environmental protection and energy saving and conform to the latest GB1094.1-2-1996, GB1094.3-2003, GB1094.5-2003, GB/T6451-2008 and IEC-76. The performance indexes reach the international level. In addition, company has been identified with ISO9001, ISO14001 and PCCC so that we are capable for controlling design, development, production, installation and service effectively. The application in the residential community can relieve residents from noise and visual pollution completely. The application in the medium-voltage power transmission system can not only resolve the technical difficulty of remote and small-load power transmission for illumination of highways and municipal infrastructure but also offers additional selection to optimize illumination supply and distribution of tunnels and large bridges. Its performance of energy saving is considerable where the no-load loss is just the value of 30-50% and no-load current is just the value of 10% specified in GB/T6451-2008. Therefore embedded transformer has been used in many key projects in China, filled in the Chinese gap and substituted the imported ones. Features : 1. High reliability. The entire protection grade is IP68. The casing of transformer is made of high-grade stainless steel so that it guarantees the 30-year life, requires zero maintenance and service and increases the reliability of supply system effectively. 2. Low loss. The performance of energy saving is obvious. Particularly the no-load loss of S13 is much more less than S9 and registers the average value of 50% specified in GB/T6451-2008. 3. Low noise. For this series, the level of noise is lower than 40dB and is universally minimum 40% less than national standard. 4. Installation environment. It is suitable for illumination and power systems of streets, highways, bridges, tunnels, parks, airports, ports and scenic spots, especially in central cities with high population density. It shall be installed in basements or silos. 5. Wholly-sealed structure. Hi/lo-voltage lead-in/out is connected in the wholly waterproof, insulated and shielded manner. The casing is made of high-grade corrosion-resistance stainless steel and wholly sealed. We guarantee the zero leakage when transformer runs in water intermittently. 6. Protection system. Give full considerations to convenient operations and safety. All fittings are manufactured by COOPER®. 7. Design of temperature rise. Transformer adopts the design of low loss and temperature rise because we take account of special heat radiation. 8. Beautify the environment. Wholly embedded transformer or transformer station can be installed under the ground completely so that the installation will not affect the surrounding environment. Transformer of semi-embedded transformer station is installed under the ground and small controller part on the ground can suit ambient environment easily. 9. Create values for customers. Because embedded transformers are installed under municipal roads or highways, they will leave a large advertisement space on the ground and create advertisement income for a long time. If embedded transformers are applied in the residential community, they can beautify the neighborhood environment and promote the taste of residential community. Capacity range: 10-2000kVA Level of voltage: 6-10kV Voltage regulation: non-exciting Shunting scope: ±5%, ±2×2.5%, +3（-1）×2.5% or others upon the request of customers Frequency: 50Hz Number of phase: three-phase or single phase Coupling group: Dyn11 or others upon the request of customers Short-circuit impedance: GB or others upon the request of customers Relative humidity: ≤100% Ambient temperature: ≤40°C or others upon the request of customers Protection grade: IP68 Installation position: basement or silo Sound level: <45dB High-voltage connection: insert-type sealed elbow Low-voltage connection: 3M waterproof sealing Insulation: power frequency withstand voltage of 35kV and surge withstand voltage of 75kV for transformer at the level of 10kV There is a string of great improvements in material, process and structure of this series so that the electrical performance reaches the international level. It features high efficiency, low loss, less electricity and running cost and considerable social benefits. It is a new product recommended by governments and used widely in municipal communications, municipal projects, residential community, airports, bus stations, schools, highways and other places.