Elektromagnetische Durchflussmesser (Remote Type) / Durchflussmesser

Electromagnetic Flow Meter(Remote Type)/flow meter/gas flowmeter/water flowmeter electromagnetic flowmeter measuring instrument Suitable tube caliber: DN25 DN2600(below DN25 unstandard) Electrode material: 316L(stainless steel), HC, HB, Ti, Ta Suitable Medium: Liquid with conductive ratio more than 5 μs/cm Measuring range: 0.1 10m/s (extendable to 15m/s) Upper limit of span: 0.5 10m/s. 1 5m/s recommended Accuracy class: 0.3, 0.5, 1.0 Output signal: 4 20mADC, load≤ 750Ω, 0 3kHz, 5V with source and changeable width. High terminal and effective frequency output, RS485 interface Operation pressure: 1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special) Fluid temperature: 20C 80C, 80C 130C, 130C 180C according to liner material Environmental temperature: sensor40 80º C. Transducer 15 50º C Environmental humidity: ≤85%RH (at 20º C)Cable outlet size: M20x1.5 Power supply: 220VAC± 10%, 50Hz± 1Hz, 24VDC± 10% Power consumption: ≤8W Protection ratings Combined type: IP65. Separate type: Sensor IP68, transducer IP65 Materials of liner: PTFE, soft rubber etc Connection of flange: GB911988(DIN2051, BS4504) Earthing material: 1Cr18Ni9Ti (stainless steel), HC, Ti, Ta, Cu