Ein Smart Switch für Home-Automation

Smart Switch L1-HSS2XT 1) Touch screen: scene switch, each control switch, The remote controller adopts the touch-sensitive screen to be operated, insulation materials, and high-performance guranttee. 2) State display: the LED lamp will display all the light and the use of applicance state. 3) No Touch Point: will not cause touch spark, increase the use of safety. 4) Component Material: Posts copper materials, import enviromental protection components. 5) Power-off protection: when power failure, it will automatically turn off the light. 6) Lower power: the standy power consumption is less than 80 microamps, energy-saving lamps do not flash. 7) Lock function: lock switch, this room is no longer controlled by the other room,don't disturb your work, and rest. 8) Control signal: Between the switch and switch, the switch and remote control all use the wireless two-way communication. 9) System: with a several mutual control switch, remote control composed wireless local area network.all switches, remote control can be carry on communication and interaction. the switch can control the switch, and the switch state can be fed back to the remote control. 10)Remote Distance: 80 meters distance can be seen. 11. Wireless Frequency: 433MHZ/315MHZ, civil standard frequency. do not harmfull to the human. 12)Function scalable: install the smart gateway, can be achieved computer, network, mobile phone control. Specification: Specification Three-gang smart switch Size 86mm*86mm*39mm Material Plexiglass panel Rated Voltage AC 100-250V 50/60Hz Rated Current Each 5A Load types incandescent, energy-saving lamps, fluorescent lamps etc. Receiving Sensitivity -95db Receiving Frecuency315MHz/433MHZ(According to the customer require) Standby Current <60uA Standby Consumption0.016W Rated Load Resistive:600W, Sensibility: 200W Over-Current Protection 3A Protective Tube Temperature -30 70°C Living-Life100,000 operation times