DW45 (CW1) Air Circuit Breaker

Air Circuit Breaker,ACB,circuit breaker(DW45,CW1,DW17,DW15,ME,SW1,CDW1,NW1), breaker OEM SERVICE factory circuit breakers 1. General1.1 Application scopeDW45series air circuit breaker is suitable for the circuit of AC 50Hz/60Hz with rated service voltage 400V, 690V and rated service current up to 6300A. It is mainly used to distribute electric energy and protect circuits and electric equipment against over-load, under-voltage, short-circuit and single-phase earthing fault.With intelligentized and selective protection functions, the breaker can improve the reliability of power supply, and avoid unnecessary power failure. The breaker is applicable for power stations, factories, mines (for 690V) and modern high- buildings, especially for the distribution system of intelligentized building.1.2 Standard: IEC/EN 60947-2.2. Operation conditions2.1 Temperature condition: -5°C 40°C;the average value within 24h shall not exceed+35°C(special situation excluded);2.2 Altitude:≤2000m;2.3 Pollution grade: Grade 3;2.4 Air conditions:At mounting site, relative humidity not exceed 50% at the max temperature of +40°C, higher relative humidity isallowable under lower temperature,RH could be 90% at +20°C, special measures should betaken to occurrence of dews;2.5 Note: Without the intelligent controller, the breaker functions as a switch-disconnector.3,Technical parameters: