Doppelwand-Schrumpfschlauch

Product Facts 4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters. Flame-retardant and mechanically tough, the tubing provides strain relief and abrasion protection of wire splices, terminals, and other components. Thick adhesive liner forms an effective barrier against fluids and moisture andperforms well at an extended temperature range Operating Temperature Range -40 +125 Minimum shrink temperature: 90°C Minimum full recovery temperature: 110°C Product Dimensions Specifications Minimum Expanded as Supplied (D) Maximum Recovered After Heating (d) Recovered Wall Thickness Adhesive Wall After Heating Φ6 6 1.5 1.2 0.6 Φ8 8 2.0 1.5 0.8 Φ11 11 2.5 1.9 1.0 Φ14 14 3.0 2.1 1.2 Φ18 18 4.5 2.4 1.3 The other specifications are available subject special order. Color: Black The code of color: 0 Feature Item Requirements Test result Test Method Tensile strength (MPa) before heat aging ≥10.4 14 ASTMD2671 Elongation at break(%) before heat aging ≥200 250 ASTMD2671 Tensile strength (MPa) after heat aging ≥7.3 7.9 ASTMD2671 Elongation at break(%) after heat aging ≥100 200 ASTMD2671 Low temperature flexibility (-40,4h) No flaw Pass UL224 Water absorption (%) ≤0.5 0.3 UL224 Eccentricity Ratio (%) ≤30 ≤30 ASTMD2671 Dielectric (kV/mm) ≥20 23 ASTMD2671 Insulation resistance (Ω·cm) ≥1014 ≥1014 ASTMD2671 Anti-Corrosion Pass Pass ASTMD2671 Oxidation data ≥28 31 UL224 Heat aging 136,168h Pass Selection Guide SIZE Tight and full recovery MARK Subject to order ABOUT ORDER Specifications and length, for example: SBZS-0-8-50mm