Doppelglas-machineGPL XY2000Y

Double glass machine 1.press machine Technical from Australia PLC PANASOIC , PANASONIC transducer , WENVIEW monitor from Taiwan, sensor AUTONICS Made in south korea. The main electric parts can running more than 50,000,000 times.its automatic running realize transportation ,speed up press glass --- two or three pieces of glass & differernt sizes of glass .it adjust the size of different glass by servo moter, it is high auto and more exact running.( SAIXIN different from others )The press part can open and go side to install and maintain the machine.the front box is vaccume , the back box is pneumatic driving. It can deal with two or three pieces of glass and curtain walls .( SAIXIN different from others )when press it is control by mechanical hand ( mechanical position & suck part from Taiwan) , all this make the press right position will not dislocation. ( SAIXIN different from others )when pressthe glass will leave the transportation rolle to do in this way it will longer the life time of transportation roller and will not break the glass. the speed is 45 M per minute and it has glass waiting process ,its high effection will produce 900 pieces of glass in 8 hours. the frame is welding from 2.75 mm international rectangular pipe, high strength of frame and it will not change the shape. 2. washing machine The washing part was welding by stainless stell ,it is high strength and shape will not change ;the top parts made from 12mm thick stainless steel ; the bottom is made from 5mm thick stainless steel ,the lateral is made from 2mm thick stainless steel. OMRON recgonization system for low E glass, it can know if it is the coating side of the low-E glass.if it is Low_E glass the hard brushes will apert avoid damaging the coating of glass. six anti-temperature brushes, diameter is 180 mm. four sprayer, high speed, glass washing clean, speed is about 10-12m per minute. ( SAIXIN different from others ) The sping is stainless steel and can adjust 3-20 mm for different thickness of glass. All part contact water include the axle in the washing machine is stainless steel,copper or waterproof aluminum,nylon and so on, it will not rust for long time running ,and easy to maintain. Dear driving system take chain reaction so it will not leave the original positon after long time runnning. Dry part frame is stainless steel wil not dirty the glass second time. ,the circle wind also down the noise. The circle hot wind down the noice come from the machine( in winter the hot wind temperature can reach 40 even no heating).