DMC2410 Motion Controller

Introduction: The DMC2410 is a 4 axes motion control card with PCI bus. It can generate high frequency pulses to drive stepping motors and servo motors.The DMC2410 uses an ASIC to perform 4 axes motion control. The motion control functions include trapezoidal and S-curve velocity profile, linear interpolation between four axes, continuous motion, in positioning and home return are done by the ASIC. Since these functions needing complex computations are done internally on the ASIC, the PCs CPU is free to supervise and perform other tasks.Incremental encoder interface on all four axes provide the ability to correct for positioning errors generated by inaccurate mechanical transmissions. In addition, mechanical sensor interface, servo motor interface and general purpose I/O signals are provided for system integration. Multiple DMC2410 cards can be used in one system. Features: The following lists summarize the main features of the DMC2410 motion control card. Advanced RISC processor for robust real-time motion and I/O control.4 axes ofpulse and direction output for controlling stepping&servo motors.Maximum output frequency up to 5 Mpps.Trapezoidal and S-curve velocity profiles.2-axis circular and 4-axis linear interpolation.28-bit up/down counter for incremental encoder feedback.High speed position latch for each axis and output compare.Change Speed on the Fly.Simultaneous start/stop motion on multiple axes.Manual pulser input interface.Extensive on-board 40 general purpose digital I/O.Software supports maximum up to 8 DMC2410 cards (32 axes) operation.Support C/C++/C#, LabVIEW and Visual Basic programming.Motion 2410, a Microsoft Windows based application testing software.Powerful suite of software utilities and sample programs included.See itsmanual for more information, and you can download themanual from the website of Leadshine.