digital XENON HID KIT

Super stabledigital HID KITWide Voltage Ballast Super-slim DSP Ballast CAN BUS Design ---------------------------------------------------------------------------------------------------------------The set is composed of1. 2 DSP ballast (Model No.: FS01)2. 2 Single lights3. 2 Fixing Pads4. Screws and Wiring's5. Users' Manual6. Color Box-----------------------------------------------------------------------------------------------------------------Ballast Ballast Parameter( Model No.: FS01)1. Working voltage ranged: 9 to 16V DC2. Working current: 3.2A (at 12V DC)3. Input voltage: 12V DC4. Input current when turn on the light: <5.5A5. Instantaneous voltage when turn on the light: 23 ±1kV6. Output power: 35 ±0.5W7. Working temperature range: -40 to +105 degrees Celsius8. Output load: one HID 35W lamp9. EMI electromagnetic compatible standard to the ballast: S95, 54 and EC10. Reverse polarity protection ; Short/open-circuit protection11. Shock, water and dust-resistant protection12. Size: 9.6 x 5.8 x 1.5cm.Ballast Features1. Cold light low current, quick start light.2. DSP intelligent start, no impact on light bulb, prolong the life more than three times3. Intelligent power compensation, stable brightness output4. Low pressure drop power, safety protection original car circuit 5. Fewer Components, less consumption, high efficiency, low temperature and low failure rate6. With CAN-BUS design, fully inhibit transmission, radiated interference. Never interfere with the original car appliance7. Installed directly on any car models, without any auxiliary decoder------------------------------------------------------------------------------------------------------------------------Bulbs1. Bulb Type: H1, H3, H7, H8, H9, H10, H11, H13,HB1, HB2, HB3, HB4, HB59003, 9004, 9005, 9006, 9007, 9008, 9140, 9145880, 881, 886, 889, 893, 894, 89, 898, 899 (all 800 series available)D2S, D2R, D2C-- D2S, D2R, D2C kits require a wiring harness that is sold separately2. Color temperature: from 4300K, 5000K, 6000K, 8000K, 10000K, 12000K,15000K to 30000K ------------------------------------------------------------------------------------------------------------------------ The following tests are carried out before delivery: 1) 6 hours continuous working aging test 2) Connection circuit protection test. 3) Over voltage protection test 4) Flash light concussion test 5) Quakeproof capability test 6) Cold, warm boot test 7) Polarity protection test 8) Short and circuit protection test 9) EMC anti-jamming test 10) Ballast and bulb matching test