Die faseroptischen Laserschweißmaschine

Fiber optic laser welding machine Flex welder, laser welding machine It is widely used for welding work pieces which have specific and flexible requirements, just like machine parts, relays, sensors, elaborate components, etc. This machine has already applied for the Chinese patents (No.20060098747.6) Specification Laser Power Supply Input voltage: AC 380V 50z/ 60Hz 3 phase 5 wire Input current: AC 60A Power consumption: 8KW Continuous working time: ≥16h Laser System Wavelength: 1.064&mum; Laser source: Nd: YAG Output Power: Max. 200W (Main Beam) Pulse Frequency: 0-100Hz (adjustable) Pulse Width: 0.1-10ms (adjustable) Focal lens : F=75mm Φ=30mm Current: 100-450A (adjustable) Pilotlaser: Integrating pilot laser for position: Diode laser 635nm 3-5V Foot Switch Fiber Beam Delivery Numbers of Fiber Cables: 1 Main Laser Beam Single Pulse Power: ≤70J Efficiency of Fiber coupling transmit: ≥75% Min. Spot Diameter: 0.6mm Optic Fiber: AS 600, length: 10m (from Germany) Cooling Units Inner cycle water cooling units: deionized water or pure water flowrate: 25L/M Inner cycle water temperature: 150C 350C Malfunction protection: over temperature protection Working Table X Y axis can be controlled by PLC or Industrial stick The max. traveling range: X axis: 200mm; Y axis: 200mm; Z axis: 200mm Observing System CCD + Co-axis observed Mounting + Monitor Or Microscope (20x) External Chiller Cooling capacity: up to 8KW Input power supply: 3.21KW 380V 50Hz/ 60 Hz Cycling water: Deionized water or pure water Flow rate: 30L/M (Max.) Adjustable Temperature Range: 7-300C Adjustable temperature precision: ± 30C Inner diameter of water pipe: 18mm Additional function: Low-flow flat protection, over temperature Running condition Ambient Temperature: 10-350C Humidity: ≤75% (no condensation) Pollution: no ash, oil mist or erodent gas Dimension (LxWxH) Laser System: 900mm x 980mm x500mm External Chiller: 1040mm x580mmx1030mm Weight: 380Kg