Dicyandiamid-Formaldehyd-Harz

Product nameHigh-efficiency decoloring flocculant AliasWater decoloring agentProduct descriptionIt is cationic high molecular compound, it is decloring, flocculating and can remove COD etc.Quality indexItemQTYR-01 typeQTYR-02 typeQTYR-03 typeQTYR-04 typeQTYR-09 typeAppearancecolorless or light-color viscose liquidcolorless or light-color liquidlight-color liquidwhite powder solidDynamic viscosity (cps,20°C)250 500150 350150 350100 350-PH value (30% water solution)3.0 5.03.0 5.03.0 5.03.0 5.03.0 5.0Solid content % ≥5050505095pictureAttention to the use of methods and matters1. The product shall be diluted with 10-40 times water and then dosed into the waste water directly. After being mixed for several minutes, it can be precipitated or air-floated to become clear water. 2. The pH value of the waste water should be adjusted to 6-10 for better result. 3. When the colority and CODcr are relatively high, it can be used with the help of polyaluminum chloride, but not mixed together. In this way, the treatment cost can be lowered. Whether polyaluminum chloride is used beforewards or afterwards depends on the flocculation test and the treatment process. Storage and packing1, It is non-inflammable, non-explosive, should be stored in room temperature, avoid solarization.2, In plastic drum 25kg, 200kg or 250kg/drum or in 1000kg IBC or upon clients' requests.3, cryogenic storage if stratification, blanch phenomenon, its effects do not affect the juice for later use.