dehnbaren Tor

TONGSHUAI FOLDING GATE SPECIFICATION 1) The material is stainless steel standard: material: stainless 301 or stainless 304. 2) main part of the door body: 38 mm×25 mm×1mm stainless tube; joint frame 30 ×15 ×1 mmstainless tube, which can effectively prevent the extension door from rust and corrosion. 3) TS extension door is the first remote controlling extension door which has encompassed 13 national patents. 4) All kinds of extension doors: extension structure with double-plane link lever, complete inner connection and double column integration in upright direction; preventing the pushing poles from pushing off the sliding guide and evenly stressed ensure moving in one line. 5) Accessories are produced by special type PVC material, no dehiscence, also if customer's requirement of stainless steel is acceptable easy to install. 6) Self-lubricate technology to prolong the wheel natural life, and reduce noise while sliding. 7) Stainless steel link lever slide guide, steady moving, wear-resisting and long using time. 8) Special material for the wheels, can be sure of sliding 50,000,000 times no wear and tear. 9) Long distance between two guide rails, low barycenter, fine stabilization, strong wind force resistance. 10) Easy to change the working status from automatic to manual control mode, in case the power failure. 11) Alarm function while people try to open gate with force or climb over the gate from top. 12) The LED screen can display 500 characters by rolling content and rolling speed, and can input English. 13) Infrared anti-bump device, auto stop or fall back when the gate is 20cm - 50cm 14) Usually the height of the gate is: 1.2M, 1.4M, 1.6M, 1.8M. The width is 40cm in the extend state