DCS810S Digitale Pinsel Servo Drive

The DCS810S is a digital DC servo drive developed with DSP and high efficient MOSFET technologies. In position control, it's easy for the end users to change stepping drives to the DCS810S without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drives. In low power motion control applications, performances of DC servo systems using the DCS810S are better than those of digital AC servo systems in velocity, precision, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810S stays at the price line of stepping drive, namely far lower than those of AC servo drives. The connectors of the DCS810S are specially designed to be compatible with those of the DB810-50V, which have been widely used in inkjet printers. The users can switch to the DCS810S without changing the previous system. Broader input voltage range also makes the DCS810S drive broader range of servo motors than the DB810-50V. What's more, the DCS810S has lower hearting than the DB810-50V owing to its advance digital algorithm. Compared to the DCS810, the DCS810S accepts single-ended encoder signals while the DCS810 accepts differential encoder signals. The DCS810S is very easy to tune and all parameters are visible. PC based and handheld configuration & tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements. Features: 18-80VDC, 0-20A, 20-400W.Based on DSP control technology and high smooth servo control algorithm.Parameter visible tuning tools, including Pro Tuner, EZ Tuner and STU.Feedback resolution ×4 encoder line count.Position Following error lock range adjustablePosition error can be eliminated to 1 count, and Velocity error can be eliminated to the Desired Velocity* ±0.3%Electronic gear ratio from 1/255 to 255Built-in motion controller for self-test with trapezoidal velocity profileSupport PUL/DIR and CW/CCW control signalsOpto-isolated inputs, support single-ended and differential signals10 latest errors self-record functionOver-current, over-voltage, under-voltage, phase error, encoder error, position following error protectionsSmall size, surface-mount technology Applications: Suitable for a wide range of equipments and instruments such as mini type engraving machines, jet-ink machines, etc. It performs better in equipments desired for low noise, high velocity, high precision and high reliability. Please visit leadshine's website for more information about this product.