DC-AC-Wechselrichter

Inverter 1,Overloading protectin: When load too many appliances and the total power is overload, the inverter will stop working within ten seconds.Then the protectin indicator red LED will get light and the inverter will be fixed on the protection state. Till reduce the load,turn the general switch to the OFF over ten seconds.Then turn the general switch to the ON,the inverter will renew to work; 2,Short circuit protectin: Once the appliance gets short circuit ,the inverter will sto working within two seconds,the overload indicater red LED will get light and be fixed on the protection state. Till the appliance is take awayt or the short circuit problem is solved,then turn the general switch on ,the invertor will renew to work. 3,Exceeding temperature protection: When the load is too much or the climate is fervent or the ventilation is bad,the interior temperature of the invertor willget higher.When the temperature rises to some extent,the protection indicater red LEDwill get light and the inverter willstop working and be fixed on the protection state.Suggest to reduce the load or to improve the ventilation condition.After the interior temperature gets lower,turn the general switch to the OFFover the seconds,then turn it back to the ON,the inverter will renew to work.