DC-4910 Entfärber

Properties 1.The product is mainly used to decolor the effluent with high chromaticity from the dyestuff plant. It is adequate for activated, acidic and dispersing dyes. 2.The product is also used in the treatment of effluent from textile, printing & dyeing industry and printing ink. 3. it is also used as retention agent and sizing agent in papermaking process. specifications 1. colorless or light-color sticky liquid。 2. Dynamic viscosity (cps,20°C) : 30～1000 3. PH (30% water solution): 2-5 4. Solid content : ≥50% Application 1.The product shall be diluted with 10 40 times water, then added to the wastewater directly. After stirring for several minutes, the clear water will be got by precipitation or air-floatation. 2.The optimized PH of the wastewater accepted is 7-10. 3.It is recommended to use this product with the inorganic flocculants to treat the effluent with high color and COD to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the effluent treatment process. Packing ans storage 1. The product is packed in plastic drums according to the requirements of clients. 2. The product is nonflammable and unexplosive. The suitable storage temperature is 5 30°C. Insolation is forbidden. Update Date:2010-10-26 0:12:35