Dampf mit Strom Heizung Blei-Säure-Bat Aided

Steam Aided with Electricity Heating Lead Acid Battery Plate Flash Dryer Flash Dryer (Heat by steam aided with electricity) is important equipment of surface flash drying and solidifying after finishing of grid pasting, water pour and acid pour, with the advantages of suitable structure, convenient operation, and easy maintenance and repair, and high productivity. It adopts steam as the first heat supply, transmit heat through the heat interchanger and then dry grid. When the temperature could not achieve users' request, the equipment can automatically open the electric heating tube that can rise the temperature. It also adopts hot air circulation pipeline with high heat utilization efficiency and uses belt chain to feed grid horizontally. Both the upper and lower part have air flue that can dry the both sides of grid simultaneously with the advantages of superior drying effect and high production efficiency. It fits for varied specifications of gridMain Specifications2.1.Production efficiency: 80 120(big pieces/min)2.2.Capacity of machine: Engine of blower 11KWAir blower of air extraction 1.1KWEngine of main drive 1.5KWEngine of grid collecting 0.55KWHeating pipe 60Kw2.3.Weight:about 4T (MT) 2.4.Pressure of steam:0.3 0.8Mpa/cm22.5.Whole Length:11m2.6. The pure stainless chain adopt imported 316L.The circulative air flue is of suitable design and it does not form bigger air current, avoiding the grid distortion. The door is distributed evenly with good sealing quality. The switch of door is with knob and is flexible with good heat preservation.2.7. The design and manufacture of this machine conforms to the corresponding requirement of national standard.2.8. Range of supply:Dryer (the front and back frame, oven, transmission mechanism, air blower, heating device transport chain, grid collecting rack), Electric control system