Cr Series Ultrafeine Prallmühle

One CR series ultrafine impact mill This kind of mill is developed by us on the basis of the characteristics of the existing impact mills of different types at home and abroad.It integrates the uxisting impact mills of different types at home and abroad.It integrates the unique smashing principle and the grading technology into one body,so it has the prominent energy saving effect and the ultrafine smashing function. It is applied to smash the material with the hardness less than 3 and especially applied to smash the materials such as talc,mica,plumbago,coating,AC foam agent,pesticide, dyestuffs,Petroleum Coke,burning preventing material,carbon Blank,foodstuffs,feedstuffs,etc. Two Working Principle Of CR Ultrafine Impact Mill The material is fed into the crushing chamber by the quantitative feed system, the material is impacted and sheared between the rotor rotating at a high speed and the gear backing fixed roller, the crushed material then enters the classifying section under the air flow action, the accepted mateial is cllollected by the cyclon and the dust collector, the unaccepted material returns to the crushing section to be crushed again.Its special design can make the material fully dispersed, crushed with energy saving and crushing efficiency improving. Three Characteristic of CR Series Ultrafine Impact Mill 1.Simple and compact structure, high production capacity, low energy consumption, less wearing parts and easy maintenance. 2.This kind of machine has a variety of crushing modes, its type can be selected according to the characteristics of material. 3.It operates under the negative pressure, the dust does not run out, so this can guarantee work environment for the workers. 4.The air flowing can help to reduce the temperature in the machine, so it is suitable for heat- sensitive material crushing. 5.Integrating the crushing function with the classifying function into one body can separate the material that has already met the finess requirements in time, avoiding its excessive crushing and achieving the small granularity range. Four Application Scope of CR Series Ultrafine Impact Mill It has a wide application, all kinds of dry materials with Morse Hardness less than 5 and moisture content less than can be crushed by machine. It is also suitable for flake, needle, fibrous material crushing and can also disperse and classify the wet non-metallic mineral powder dry after grading scattered. It is specially used in chemical, pharmaceutical, food, catalyst, aluminum hydroxide, alumina, talc, mica, graphite, AC foaming agent, petroleum coke, pesticides, dyestuff, coating, flame retardant, carbon black, copying ink powder , electronic material and new material industries etc. Five CR SERIES ULTRAFINE IMPACT MILL Brief Specifications Parameters Model CR600 CR800 CR1000 CR1200 CR1600 Feeding Particle Size (mm) <15 <15 <15 <15 <15 Particle Size of powder (µm) 2-180 2-180 2-180 2-180 2-180 Product Capacity (T/h) 0.1-2 0.3-3 0.5-5 0.8-8 1.2-12 SmashingPowder (Kw) 22-45 45-55 55-75 75-132 132-160