Controller DACTS705

controller Description The Model DACTS705 is a microcontroller-based diesel generator auto controller,The controller is used to automatically startanc stop the diesel generator,indicating th operational status and faults of the diesel generator by means of an LCD display and a flashing LED on the front panel,shutting down automatically the diesel on fault condition.The controller provides a digital list of timers and pre-configured parameters,LCD icon displays for various diesel faults.lt features fully functions,high performance and low cost. Features 1.Automatically controls the diesel to start and stop 2.The controller provides the following analogue channels:three phases/wire generator voltage,three-phese load current,battery voltage,coolant temperature,oil pressure,generator speed,generator frequency,charge voltage,total run time. 3.The controller accepts four digital inputs:remote start,high coolant temperature,two configurable inputs. 4.Relay outputs are provided for LCD1,LCD2,LCD3,LCD4,three configurable outputs 5.Custom digital inputs and relay outputs 6.Automatically shuts down the diesel on fault condition 7.Multiple diesel alarm channels are provided to monitor the following:under/over generator voltage,load current overload.under/over generator frequency,low oil pressure,high coolant temperature,over speed,charge failure,low battery voltage,emergency stop,fail to start 8.Multicolor and graphical icon LCD display 9.Competitive price Specification DC supply:8 to 36V DCGenerator voltage input range:0 to 500V AC, 3 phase 4 wireGenerator vurrent input range:0 to 5A ACGenerator input frequency:0 to 99Hz at rated engine generator speedCharge fail/Excitation range:8 to 35V DCOperating temperature10°C to +60°CRelay output:VCC / 2A DCMagnetic Pick-up Voltage lnput:+/ -0.5V to 70V(peak)Magnetic lnput Frequency:10,000Hz(max)Overall dimension:223.5x148.5x41mm(W x H x D)Cut-out on the panel dimension:197x135mm(W x H)