ConScan Serie Wasserdichte Taschen-Leitfähigkeitstest

CONscan series waterproof pocket conductivity tester includes models 20, 30, 40 for the measurement of electrical conductivity value of liquids. These testers without the temperature compensation function. Applications: 1. CONscan20 for measuring low conductivity fluids, Eg. Pure water. 2. CONscan30 for measuring general conductivity fluids, Eg. Tap water. 3. CONscan40 for measuring high conductivity fluids, Eg. Waste water. Single Point Calibration: The tester allows user to use the customized calibration solution. You need sets the known conductivity value on the tester, immerses the electrode into standard calibration solution and presses the CAL key and the tester is automatically calibrated. Hold Function: During the measurement, hold function can momentarily freeze the reading on the display for easy viewing and recording. Platinum Electrode: CONscan series testers use a standard platinum sensor for a fast and reliable measurement. Replaceable sensor design facilitates maintenance. Auto-Power Off: These testers will automatically power down 8 minutes after the last key press. This function is helpful to save battery. It can also be turned off manually. Waterproof Feature: O-ring seals on the screw-tight battery and sensor compartments prevent water damage even if fully immersed. The unit also floats. Specifications: Model: CONscan20 Conductivity Range: 0.0 to 199.9uS/cm Resolution: 0.1uS/cm Conductivity Accuracy: ±1%F.S Calibration Points: 1 point Calibration Solution: 100 to 170uS/cm Temperature Coefficient: 2% per oC, fixed Auto-Power Off: 8 minutes after last key pressed Normalization Temperature: 25 oC, fixed Operating Temperature: 0 to 60 oC Power Requirements: 3×1.5V alkaline batteries Battery Life: Approx.150 hours of continuous use Dimensions: 180(L)×30(Dia.)mm Weight: 85g Model: CONscan30 Conductivity Range: 0 to 1999uS/cm Resolution: 1uS/cm Conductivity Accuracy: ±1%F.S Calibration Points: 1 point Calibration Solution: 1000 to 1700uS/cm Temperature Coefficient: 2% per oC, fixed Auto-Power Off: 8 minutes after last key pressed Normalization Temperature: 25 oC, fixed Operating Temperature: 0 to 60 oC Power Requirements: 3×1.5V alkaline batteries Battery Life: Approx.150 hours of continuous use Dimensions: 180(L)×30(Dia.)mm Weight: 85g Model: CONscan40 Conductivity Range: 0.00 to 19.99mS/cm Resolution: 0.01mS/cm Conductivity Accuracy: ±1%F.S Calibration Points: 1 point Calibration Solution: 10 to 17mS/cm Temperature Coefficient: 2% per oC, fixed Auto-Power Off: 8 minutes after last key pressed Normalization Temperature: 25 oC, fixed Operating Temperature: 0 to 60 oC Power Requirements: 3×1.5V alkaline batteries Battery Life: Approx.150 hours of continuous use Dimensions: 180(L)×30(Dia.)mm Weight: 85g * The instrument provides OEM service.