Common-Rail-Tester

common rail tester CR-200 test bench is our latest indepentent researched special device to test the performance of high-pressure common rail pump and injector, it can be mounted on the traditional test bench,it adopts the BOSCH original common rail pump to provide 0 2000 bar of rail pressure, it can test common rail pump and injector of BOSCH, SIEMENS, DELPHI, DENSO. Advanced technology, steady performance and convenient operation. >>>CHARACTERISTIC 1. It can be mounted on the traditional test bench.2. It is installed BOSCH common rail pump to provide 0 2000 bar ofrail pressure.3. Drive signal can be controlled. 4. Protection function of short-circuit. 5. Rail pressure can be tested in real time, it contains thehigh-pressure protection function.6. Pulse and frequency of the injector drive signal can be adjusted.7. Injection time can be setted. 8. Four high-brightness digital data display.>>>FUNCTION Common Rail InjectorCommon Rail Pump1. Test brands: BOSCH, SIEMENS, DELPHI, DENSO.1. Test brands: BOSCH, SIEMENS, DELPHI, DENSO.2. Test six pieces of injectors at a time.2. Test the sealing of common rail pump.3. Test the max. oil quantity of high-pressure common rail injector.3. Test the internal pressure of common rail pump.4. Test the cranking oil quantity of high-pressure common railinjector.4. Test the proportional electromagnetic valve of common rail pump.5. Test the backflow oil quantity of high-pressure common railinjector.5. Test the input pressure of common rail pump.6. Test the average oil quantity of high-pressure common railinjector.6. Test the flux of common rail pump.7. Set the high-pressure common rail injector's injection state and oil quantity measurement.7. Measure the rail pressure in real time.>>>TECHNICAL PARAMETER Injection testing frequency50 3000 rpmPulse width0.1 200 msContinuous injection times0 1000Fuel temperature40±2degreeRail high pressure0 2000 barTest oil filtered precision5μInput power220v/50hzWeight500 kg.