CIL-SP-A Full- automatische Rückspulen und Loch

toilet paper machine ,kitchen towel rewinding machine,towel machine,rewinding and perforated toilet paper machine CIL-SP-A Full-automatic dot-by-dot high-speed rewinding and perforated toilet paper and towel paper machine Description of product: CIL-SP-A Full-automatic high-speed rewinding and perforated toilet paper machine, This equipment is to perforate and cut the raw paper into various sizes according to the requested. The finished product is neat, in good order and with equality tension. It has the feature of compact structure, easy and stable operation, less electricity consumption and covers a small area of 8.4 m². The highest production speed is 120-160m/min. This model is the ideal equipment for paper making factory and paper processing factory. This equipment can process raw paper of 1.2m 1.75m 1.95m 2.15m 2.35m 2.55m 2.75min width. This machine is consist of stand of raw material, paper conveying unit, embossing unit, spraying unit, perforating unit, reeling unit, electricity control and cutting system. The production process is : unreeling → embossing →gluing→perforating→reeling→cutting. Features: 1. Production Procedure is controlled by Programmable controller system, fully automatic in production process, the function is complete and the production speed is high. 2. It can automatically exchange the core, spraying, and sealing without stopping the machine and also automatically raise and lower speed when exchanging the core. 3. When exchange the core, the machine will be tight first and loosen later to avoid dropping off the roll core. 4. Equipped with automatic alarm to indicate filling up of core pipe. The machine will be automatically stopped when there is no core pipes. 5. Automatic alarm for breaking off of paper. 6. Equipped separate tension control for each unwinding jumbo roll. 7. It is convenient to change the feature to produce any other core pipe winding. 8. Left paper remind after sealing of product for convenient use. 9. Jumbo roll stand is installed by pneumatic. 10. Two embossing units are equipped to produce dot-by-dot products. Technical data: 1. Production line:120-160m/min 2. Product specification:80-150mm(can be adjustable) 3. Punching line distance:100-200mm(can be adjustable) 4. Power:8.5Kw (380V 50Hz) 5. Overall sizeLxWxHm): 5.3x2.7x1.8 (with two embossing units, tow laying paper stands type) 6.Width of jumbo roll:SP92A 1.2m SP75A 1.8m 7.Weight:About 4M/T (with two embossing units, tow laying paper stands and one cutting machine)