Chemische Verankerung Kapsel (M8)

YUANDA chemical anchor capsules and studs provide a complete, epoxy acrylate based anchoringsystems for special application to concrete, solid brick and masonry materials where the use of conventional mechanical anchors is unsatisfactory.The systems is ideally suited to applications where high dynamic loads apply or for installations close to the edge of concrete or other solid masonry materials. Once cured, the adhesive resin provides a stress free bond with the stud and surrounding material. During installation the capsule, quartz aggregate and resin are pulverized and mixed together and are distributed along the embedded portion of the stud. After curing is complete the synthetic mortar retains the stud and re-inforces the surrounding material.- High load capability and Vibration resistant- Resistant to shock loading- Consolidates weak base material- No expansion stress in base material- Suitable for close-to-edge and close-centre fixingDescriptionFeatures- High load capability- Resistant to shock loading- Consolidates weak base material- No expansion stress in base material- Clean and safe to handle- No slipping or fretting- Suitable for wide range of base materials- Long shelf life- Special lengths and stainless steel studs available to special orderInstallation Procedure1. Drill the correct diameter and depth of hole in concrete substrate and clean out by brushing and blowing dust clear.2. Place capsule in hole.3. Attach supplied hexagonal key (male or female) and insert into stud top.4. Using a drilling machine, attach hex key and drive the stud on hammer action into the capsule until the bottom of the hole is reached. The drill must be used with rotation/vibration when setting the stud.5. Allow appropriate curing time before loading the anchorCure Specification:Base Material Temperature(°C)Gelling timeCuring time-10°C 0°C10 15 mins4hours0°C +10°C5 10 mins70-120 mins+10°C +25°C3 7 mins40-70 mins+25°C +40°C2 5mins25-40 mins>40°C<2mins20mins Chemical anchor Rod(5.8Grade steel zinc)Size*LengthCarton QtyCarton SizeN.Q(KGs)G.W(KG)M8*110500pcs36*28*17cm19.5020.00M10*130400pcs36*22*20cm27.0027.50M12*160200pcs36*20*17cm25.0025.50M16*190100pcs38*23*14cm27.5028.00M20*26048pcs28*24*18cm27.5028.00M24*30024pcs33*23*12cm25.0025.50M30*38012pcs41*22*11cm22.5023.00Material Specifications: Average destroy load of individual anchor bolts: Unit: KNChemical anchorCONCRETERODM8M10M12M16M20M24M30TensionC305.8ZP STUD28.732.245.871.8128.4188.6303.1C30SS31629.336.858.876.9137.7196.6338.9ShearC305.8ZP STUD16.819.729.848.078.8111.6147.7C30SS31622.227.436.663.7100.8119.6166.3