Ceramic Ozone Einheit

Main features of ceramic discharge tube: 1) High effectiveness: 800-1,000gsm, 4 to 5 times higher than normal ozone generating technology 2) Low electric consumption: high frequency corona discharge, electric consumption 8-10kW.h/kgO33) Small size: 1/4 to 1/3 small compare with the same ozone output of other products 4) Super working life, no corrosion, no oxidize, and bear high temperature: imported high pure ceramic, stainless electrode and parts, PVDF5) High pure silicone rubber, 10 years' working life6) High effective cooling: outer electrode applies wind cooling and inner electrode applies water cooling extreme low attenuation of ozone output under continues work 7) Wide voltage adaptability: 50V generates ozone; 200V reaches effective point, convenient adjustment of ozone output8) Saving feeding gas: high ozone concentration, effective saving feeding gas cost Size Occurring pipe size mm Power supply size (mm) Cooling method Air way Water Way Cooling water amount L/min Power Oxygen amount m3/h Density mg/L Output [g/h] Price FOB USD HT--20D 125×62×52 80×45 Wind cooling 6 Forth fluoride mouth - No 15W 0.012-0.12 14.6-50.4 0.60-1.75 35 HT-30D 200×80×65 155×60 60W 0.06-0.18 21-45.2 2.7-3.8 80 HT-70D 170×70×100 180×60 Wind cooling Water cooling 4×6 6×8 2 60W 0.06-0.3 19.7-46.9 2.8-5.9 120 HT-107D 220×80×110 180×65 3 85W 0.18-0.30 29-46.8 8.4-8.7 160 HT-140D 270×80×110 200×120 4 150W 0.18-0.3 62-85 15.3-18.6 258 HT-280D 400×80×110 200×120 6×8 5 280W 0.24-0.96 38.4-84.7 20.3-38.4 426 Technical requirement: Surrounding temperature: 10-30 °C Oxygen pureness: >90% Gas resource open points: -40 70 °C Air outlet pressure: ≤0.05Mpa Cooling water outlet temperature: 20+/-2° Cooling water outlet pressure: ≤0.01Mpaborder=0>