BX-Serie Cycloidal Pin-Rad Drehzahlregler

Features of B,X series Cycloidal Pin-wheel Speed Reducer:a. High speed ratio and efficiency Single stage transmission can reach to 1:87 of speed-down ratio and the efficiency is more than 90%. If use multi-speed drive the speed-down ratio is bigger.b. Compact structure, small size Being adapted epicyclic transmission principle, the input and output shaft are at same axis center, it is compact.c. Smooth and stable run and low noise The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content.d. Reliable in operation and long service lifeBecause the main parts are made of bearing steel through quenching treatmentHRC58-62, it got high strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.e. Overload ability, impact resistance and smallInertia moment. It is Applicable to the occasions of frequent startingand positive & negative rotation.Because of reasonable in design, convenient in maintenance, easy to disassemble and assemble, the minimum amount of part and simple lubrication,the reducers aretrusted by our customers deeply.Detailed parameter:Output speed(Rpm)11-167Output torque(Nm)80-22000Power(Kw)0.18-55 Cycloidal reducerhas model BW, BWD, XW and XWD. It is an up-date transmission machine designed with the cycloid pin wheel clenching and less teeth engagement mechanism. It is superior to traditional gear mechanisms, since it only operates with rolling force and is not exposed to shear forces. It is widely used in oil and chemical industry, building, mining and metallurgy, cranes, textile, engineer machine, foodstuff and electrical industry, and is well accepted by the customers. Characteristic: 1.High-speed ratio and high efficiency 2.Compact structure and small volume 3.A small moment of inertia 4.Available as geared units and geared motors 5.Ideal for operating under difficult conditions Technical data: Torque:25N.m-23400N.m Input speed:1000r/min,1500r/min Output speed:11-167r/min Ratio:9-87 Power:0.12KW-75KW