btb 0,4 mm Pitch 0,90 mm Steckhöhe weiblichen verbinden

Components:rubber core,terminals and orientation patch. Raw materials :copper alloyand plastic components Pin numbers:20Pin,24Pin,26Pin,30Pin,34Pin,40Pin,50Pin, 60Pin ,70Pin and 80Pin Application:Cellular phones,DVD,DSC etc. Features: 1.0.4 mm pitch and an ultra low profile of 0.9 mm high 2.The simple locking structures provided for the soldering terminals and the contact points improve the mating strength and provide tactile feedback when locked 3.An insulating wall provided for the bottom surface of the connector prevents contact between the pattern on the PC board and the metal pins, enabling pattern wiring under the connector, and thus contributing to the reduction in size. 4.Terminals plated with 3u'' gold. 5.Strong resistance to adverse environments. Specifications: ItemSpecifications Conditions Electrical Characteristics Rated current 0.3A/contact (Max. 5 A at total contacts) Rated voltage 60V AC/DC Breakdown voltage 150V AC for 1 min. Rated voltage is applied for one minute and check for Short circuit or damage with a detection current of 1mA Insulation resistance Min. 1,000mΩ(initial) Using 250V DC megger (applied for 1 min.) Contact resistance Max. 90mΩ Based on the contact resistance measurement methodspecified by JIS C 5402. Environmentalcharacteristics Ambient temperature –55°C to +85°C No freezing at low temperatures Soldering heat resistance Max. peak temperature of 260°C (on the surface of the PC board around the connector terminals)Infrared reflow soldering 300°C within 5 sec. 350°C within 3 sec.Soldering ironStorage temperature –55°C to +85°C (product only)–40°C to +50°C (emboss packing) No freezing at low temperatures. Thermal shock resistance(header and socket mated 5 cycles,insulation resistance min. 100MΩ,contact resistance max. 90mΩ Sequence1. –55 °C, 30 minutes2. , Max. 5 minutes3. 85 °C, 30 minutes4. , Max. 5 minutes Humidity resistance(header and socket mated) 120 hours,insulation resistance min. 100MΩ,contact resistance max.90mΩ temperature 40±2°C,humidity 90 to 95% R.H. Saltwater spray resistance(header and socket mated) 24 hours,insulation resistance min. 100MΩ,contact resistance max. 90mΩ temperature 35±2°C,saltwater concentration 5±1% H2S resistance(header and socket mated) 48 hours,contact resistance max. 70mΩ temperature 40±2°C,gas concentration 3±1 ppm,humidity 75 to 80% R.H. LifetimecharacteristicsInsertion and removal life50 timesRepeated insertion and removal speed of max. 200times/hours