Bremsklotz

our products'advantages: 1. Gradually heat treats the rotor and eliminates any thermal shock in the rotor. 2. Burn off volatiles and moisture from the resin that is near pad surface. This will eliminate reen fade.? 3. Establish a layer of transfer film about a few microns thick on the rotor surface. Shearing of the film during friction is an effective source of friction force. Otherwise, when using a freshly ground rotor without the transfer film, the main friction force would come from cutting, plowing, or scoring the asperities on the rotor surface. This leads to inconsistent braking effectiveness. 4. Mate the two surfaces to a near perfect geometrical match, so that the contact area is high, and therefore the friction force is increased. 5. The performance of a fresh rotor/fresh pad system would be inconsistent. This is due to ever-changing structures and properties of the two mating materials. Bed-in of pads and rotor will form a stable transfer film. 6. If bedding in procedure is not applied, a stable transfer film may not be established for a long time. In other words, the rotor surface would have to be constantly regenerating a film that is not quite stable for a long time. This effect would reduce the performance and increase the wear.