Blindniet 4 * 13

Name:open end type blind rivet;blind rivetMaterial:aluminum with carbon steel mandrel(al/st), aluminum with stainless steel mandrel(al/ss), aluminum with aluminum mandrel(al/al)Finish of the Rivet: polished ,oxidized or paintedFinish of the Nail:plain or zinc/color platedDiameter: 3.2mm (1/8-inch) 4.0mm (5/32-inch) 4.8mm (3/16-inch) Length: from 8 to 30mm. Grip range: 4.0 to 26.0mm (depending on different body lengths) Color:plain,red,blue etc. Place of Origin:Wenzhou, ChinaBrand Name:HodawPackage: 1000/500pcs/carton,10 cartons in a cardboard box(for export sale),the packings has a innner water-proof plastic bag and can withstand rough handling; or accroding to customer's requirement.Product Application: Suitable for joining plastics, rubber, wood, grp and laminates used in assembly of caravans, trailers, furniture, plastic-framed window body .Blind rivets are tubular and are supplied with a mandrel through the center. The rivet assembly is inserted into a hole drilled through the parts to be joined and a specially designed tool is used to draw the mandrel into the rivet. This expands the blind end of the rivet and then the mandrel snaps off. They can be inserted and fully installed in a joint from only one side of a part or structure, "blind" to the opposite side.Due to this feature, blind rivets are mainly used when access to the joint is only available from one side. The rivet is placed in a pre-drilled hole and is set by pulling the mandrel head into the rivet body, expanding the rivet body and causing it to flare against the reverse side. As the head of the mandrel reaches the face of the blind side material, the pulling force is resisted, and at a predetermined force, the mandrel will snap at its break point, also called "Blind Setting". A tight joint formed by the rivet body remains, the head of the mandrel remains encapsulated at the blind side, although variations of this are available, and the mandrel stem is ejected.Other: Can produce according to customers' drawings or samples