Blendschutz Sonnenschutzmittel für Schiffsnavigation wi

Specification introduction for anti glare sunscreens for ship's navigation windows: The main varieties, specifications, models and service conditions of the anti glare sunscreens for ship's navigation windows produced by our company are as follows: Type Parameters Stay cord typeSlide TypeElectronic TypeModel LSS-001HGS-001DDS-001window height applicable <2 m<1.7 m<2.5 mwidth of the window applicable <2.5 m<2 m<3 mPositioning mode Positioning by locking deviceWith self-positioning device Automatic positioning with upper or lower limit The proposed market price 1,300 RMB / m21,500 RMB / m22,800 RMB / m2Power By handBy hand220vAC, tubular motor driveGrouping and Controlling Dynamically grouping can be controlled by switch or hand-held remote controller.Magnitude of the driving units Single DriveSingle DriveThe single electric motor is bearing with at least 3 magnitudes or more than 4m2. Main Features Simple structure, easy installation, high cost performance, and can acceptable by most of users as well. But difficult to pull the shutter up and down. It is not artistic when the black rope piled together. Automatically positioned and equipped with the slide, without revealing the edge; it is integrated with the window surface beautiful appearance. Owing to operation limit, it is only suitable for small windows. Suitable for the operators compartment with large number of big windows. Users can pull the shutter down and up by pressing buttons or holding the remote controller by hand without moving, unnecessary to operate it by hand so as to release more energy to drive forward, which complies with the automation development trend. It is also suitable for those windows close to the driving desk or somewhere the manual type shutter can not be used. PriceAcceptablea little bit higher than that of the stay Cord type shutter Owing to high-end products for high-end users, its price shall be higher than that of the slide style shutter. Filtering materialThe multi-layer polyester films are imported from America, with the main parameters: transmission rate is 2.5 10%; Heat Insulation Ratio is 48 73%; UV resistance rate > 99%; Blaze attenuation rate > 90%; thickness> 3.5mil; tensile strength> 140MPa (-20 / 16H); Color: Gray, Gold.