Blei-Säure-Batterie LiFePO4 und EV-Ladegerät

Car battery charger Technical Target 1.5KW HF/PFC Lithium Battery Charger Models Lithium Battery Charger Vout MaxIout MaxTCCH-H35-4034.6V40ATCCH-H51-3351.1V33ATCCH-H65-2565V25ATCCH-H90-2089.8V20ATCCH-H104-16103.8V16ATCCH-H114-14114V14ATCCH-H130-12130V12ATCCH-H161-10161V10ATCCH-H203-08203V8ATCCH-H217-08217V8ATCCH-H258-6A2258V6.2ATCCH-H320-05320V5A HF/PFC 1.5KW Lead-acid Battery Charger Models Lead-acidBattery ChargerVout NominalVout MaxIout MaxTCCH-24-4024V34.6V40ATCCH-36-3336V51.1V33ATCCH-48-2548V65V25ATCCH-60-2060V89.8V20ATCCH-72-1672V103.8V16ATCCH-84-1484V114V14ATCCH-96-1296V130V12ATCCH-120-10120V161V10ATCCH-144-08144V203V8ATCCH-156-08156V217V8ATCCH-192-6.2192V258V6.2ATCCH-240-05240V320V5A AC Input Voltage Range AC85V AC265V AC Input Frequency 45 65 Hz AC Power Factor ≥0.98 Full Load Efficiency ≥93% Mechanical Shock & Vibration Resistance Level Conformance to SAEJ1378 Standard Environmental Enclosure IP46 Operating Temperature -40°C +55°C (-40°F +131°F) Storage Temperature -40°C +100°C (-40°F +212°F) Charging Mode 10 Charging Curves Available Charging Control Intelligent temperature compensation, never to be charge-off or charge due Protection Features 1. Thermal Self-Protection: When the internal temperature of the charger exceeds 75°C, the charging current will reduce automatically. If it exceeds 85°C, the charger will shutdown protectively. When the internal temperature drops, it will resume charging automatically. 2. Short-circuit Protection: When the charger encounters unexpected short-circuit, it will automatically stop to output. When fault removes, the charger will re-start in 10 seconds. 3. Reverse Connection Protection: When the battery is polarity reversed, the charger will cut off the connection between the internal circuit and the battery, and refuses to start. It can avoid any destroy. 4. Input Low-voltage & Over-voltage Protection: When the AC input Voltage is lower than 85V or higher than 265V, the charger will shutdown protectively and automatically resume working with the voltage is normal again.