BK-05033 Wireless-Auto-Dial Alarm System

BK-05033 Wireless Auto-dial Alarm System: 433MHz wireless alarm signal transmission with RF output power < 10mw in case of wire installation trouble and expense. Dial telephone or cell phone automatically when receiving alarm signals. Alarm in emergency. Work as recorder. All settings and recorded messages will not be lost when power failure occurs. Up to 38 accessories (such as remote control and transmitter) can be used in the system. Compared with similar products, this system adds a wireless outdoor siren. When the alarm is activated, a loud siren with flashing light will attract the attention from your neighbors and frighten away the intruders. The main unit can be hidden or locked away for added security. Easy installation of this system makes it advantageous over other similar products. Working distance is above 60m in open area. R6 is remote control. It can turn on/off the main unit wirelessly. R2 is indoor siren. It will alarm immediately when received alarm signal. R7 is outdoor siren. It will alarm immediately when received alarm signal. R23 is repeater. It can make the work distance longer between transmitters and receivers. R25 is code arm & disarm controller and magnetic sensor. It can arm or disarm the whole system by code and delay the alarm made by magnetic sensor. When it disarms the system with code, its signal transmission will stop. RL-05033 adopts GPRS wireless transmission technology. It can dial the phone number to make alarm without telephone line. It can arm or disarm and monitor the system in the distance.