Biomassevergasung Stromerzeugung

Introduction to biomass internal-combustion power generation system Models & specifications:400KW,800KW,1MW,1.5MW,2MW,etc Applicable raw matrrials:All the plants and organic wastes The grain size of raw materials is less than 30mm in general. The water content of the raw materials is lower than 16% in general. Nature of fuel gas:scope of calorific #118alue 6000 kilojoule/m3(standard) Tar content 50mg./m3(standard) Compositions N2 50-60% Co2 10-20% CO 10-18% H2 3-9% Ch 2-6% CnHm 0.5-3% Other 0.5-3% Operation data: Auxiliary fuel:Not necessary Start time:About 45 minutes for cold start About 15 miutes for hot start Operator:According to the project scale:1-2 persons for each shift Raw material consumption:1.0-2.0kg raw materials for generation of each kilowatt-hour Power generation cost:Will be influenced by many factors. In most regions of china,the cost for generation of each kilowatt-hour is about RMB0.2 yaun. Environment protection standara: Exhaust gas:The tail gas of gas engine shall reach the local industrial standard after treatment Waste water:The cooling water shall be trated internally for recycled use,and no waste water will be dis-charged. Waste residue:The solid wastes sahll be treated or reused through harmlessness treatment .No waste residue will be discharged. Noise:The region with noise>75 db will be reused to decrease noise influence. Smell:The space with smell will be sealed off with negative pressure,and the smell will not outflow.