Bewässerung Elektromagnetventil Serie

Product DescriptionEasy-to-use (and reach) manual bleed levers and flow control stems make adjusting water pressure simple. Industry standard threaded solenoids will work with most other irrigation products. Reverse flow diaphragm won't clog and operates well at as low as 10 PSI at only 1 GPH, to 150 PSI - perfect for drip irrigation systems all the way up to high volume needs. Compare our valves to the competition. Product DetailsOperating RangePressure: 10 to 150 PSI 075 Flow: 0.2 to 22 GPM 100T Flow: 0.2 to 40 GPM 100SS Flow: 0.2 to 40 GPM Water Temperature: Up to 110F (43 C) Ambient Air Temperature: Up to 125 F (52 C) Electrical Specifications24 VAC 50/60 cycle solenoid power requirement Inrush Current: 0.35 Amp (8.4 VA) Holding Current: 0.23 Amp (5.5 VA) Solenoid Coil Resistance: 24 Ohms DimensionsHeight: 4 3/8" (11.1 cm) Length: 5" (12.7 cm) Width: 3 1/16" (8.1 cm)