Beizlinie

The HR coil, which is the basic raw material, is passed through the pickling line to remove the oxides or scales from strop surface to enable further reduction of thickness to desired level in cold rolling mills.This processing is required since rust in formed on the surface of the coils at room temperature whereas scales are formed at high temperature during rolling in hot strip mill.1. Ferric Oxide will form on the surface layer of the steel strip during the hot rolling, and the layer of Ferric Oxide is crisp and hard2. If it exits on the surface of the strip, it will decrease the surface quality of cold rolling strip3. Layer of Ferric Oxide must be removed before cold rolling4. Pickling processing is competent for the task5. Professional in this technologyHot rolled steel coilQ195-Q235Coil thickness4mmCoil width800-1450mmCoil weight25TComponent of Pickling Line:1) Coil lifter2) Decoiler3) Guide and shovel device4) Pinch roll and 3-roll straightener (steel frame)5) Hydraulic shearing machine6) Centering welding platform7) Pinch roll and derusting device8) Loop bridge (supply by user)9) Guide & pinch roll and leveler10) Pickling groove11) Extrude acid roll12) Cleaning groove (supply by user)13) Scrub machine14) Passivation groove15) Extrude to dry roll (steel frame)16) Hydraulic shearing machine17) Vertical roll centering device18) 3-roll expansion machine & inunction device19) Recoiler20) Unload carWe can also supply the push-pull type/ continuous type pickling line, 4-HI/ 6-HI Reversible Cold Rolling Mills (Cold Reduction Machine), tandem rolling mills, slitting line, cut to length line etc.