Beheizte Regenerative Absorption Lufttrockner

Name :Heated Regenerative Absorption Air Dryer Brand : Wangda Model NO:WDXW- Characteristics of the Heated Regenerative Absorption Air Dryer offered by our company is as follows : 1.To set the circulation according to requirement 2. To control the regenerated air accurately. 3.The control system is stable and anti-inference and long life-time. The SSR contact less relay is used to control the temperature accurately 4.Low consumption of gas and power ,and effective heating 5.Multiple safe guard and multi-cycles heaters could intensify the desorption and regeneration effectively. 6.To increase dew point and monitor the control system as per the requirement. The technical data is as follows : Parameter/Model NO. DXW-1.6 DXW-3 DXW-6 DXW-10 DXW-20 DXW-30 DXW-40 DWX-60 DXW-80 DXW-100 DXW-150 DXW-200 DXW-300 DXW-500 Rated Capacity(NM³/min) 1.6 3 6 10 20 30 40 60 80 100 150 200 300 450 Working Pressure 0.35-1.0Mpa 1.0-1.6Mpa 1.6Mpa above Dew point -30°C -40°C -65°C Regenerated Gas Consumption 4-8%(Standard Working Condition) Desiccant Activated Alumina or Na molecular sieves Inlet Temperature 0-45°C Regeneration Way Heated Initial Pressure Drop <0.02Mpa Working Method The two desiccant towers work automatically and continuously Power Supply 220V/50Hz 380V/50Hz Four ware and three phase Dia of Air Inlet & Outlet mm 25 40 40 50 65 80 100 125 125 150 200 250 300 500 Installed Power KW 1.5 2.5 4 7 12 18 24 32 45 55 75 93 170 240 Average Power drain KW 0.7 1.0 1.5 2.3 4.8 7.2 9.4 12 17 20 27 35 65 90 Besides,we could design and produce at the request of the customer .