Automatische Reifenmontiermaschine mit CER und ISO

Automatice Tire changer STC1024FH2L tyre changeris the full-automatic tyre changer with luxury configure. Push-pull horizontal arm, tilt back vertical arm, equipped with assistant inflating device and double helper, and tyre lifting device, make the operation time saving, safe and easy. It is specially suitable for wide, low-profile, stiff and tubeless tyres. The quality is reliable, suitable for large tyre repair shop, 4S shop, transport team, tyre factory and so on. Motorpower 1.1kw/0.75kw Powersupply 110v/220v Operationpressure 8-10bar Max. wheeldia 47"(1200mm) Max.wheelwidth 16"(410mm) Rimclampingfromoutside 13"-24" Rimclampingfrominside 15"-28" Bead-breakerforce 2500kg Noise <70dB ITEMTurntableAssistant inflatingUpgrade HelperSortAir tankTool boxBead breakerSTC1024FH2LCrossYESYESFull- automaticOutsideYESTwo positionsFeatures: 1. Hexangular shaft used S41mm steel, not easy to distort, ensure the operation of low-profile and stiff tyre more safety. 2. The turntable, use δ15mm steel, the surface of the turntable is chromeplated, wearable and antisepticised. 3. The mounting head, used alloy material, ensure the intensity. 4. This machine equipped with the protection cover for the mounting head, clamps, lever and bead breaker shoe, to avoid the damage for the aluminum alloy rim. 5. The range for the clamping is large, suitable for the middle and small truck tyres and car tyres. 6. The inflating system adopt gauge box, equipped with rubber inflating hose, ensure long working time and safety operation. 7. This machine with tubeless tyre inflating device, make the edge of the tubeless tyre connect tightly with the rim, avoid the leakage when inflating. 8. This model can upgrade, the luxury helper AL1+AR2 with rail-style slideway are optional according to customer’s demand, can make the operation easy. 9. Equipped with tyre lifting device WL3, make the operation easy. It is easy to lift and low the tyre, only by pressing the WL3 control button. 10. The wearable steel plate on the turntable can reduce the wear for the turntable during the clamping, prolong the working time for the turntable. 11. The pneumatic bead breaker shoe have two positions, easy for the extra wide tyre. 12. The rotatable bead breaker shoe, suitable for different tyres, , with different diamater and different center high. 13. Full-automatic tyre changer with push-pull horizontal arm and tilt back vertical arm, pneumatic locking, instead of semi-automatic and manual locking method, improve the working efficiency.