Automatic Transfer Taschenfeder Production Line D

Products Information DZH-2 Automatic pocket-spring production line is professional equipment for producing pocket spring units. This Automatic mattress machine consists of the pocket spring machine, spring assembling machine and spring packing machine. Firstly, the pocket spring rows are produced by the Automatic pocket spring machine, and then transferred to the gluing system by the connection system. After this, the glue is extruded onto the spring rows and/or top and bottom non-woven fabric to make them a unit. When a unit is finished, the Automatic mattress machine will automatically cut the up and down non-woven fabric if used. DZH-2 pocket spring machine finishes the whole production process from wire to whole spring unit, and it's fully automatic and labor saving. Further, it's of safety and high capacity.This pocket spring machinebears the features below: compact design, easy operation,high capacity and cost saving.It's an ideal Automatic mattress machine for spring units production. Main Technical Parameters: Capacity 62 Pcs/min Overall Dimension pocket spring machine 2390×1680×1730mm(excluding the fabric or wire shifts) Overall Dimension For Assembler 3720×3300×1800mm Power Supply 3-Phase, 380V, 50Hz Air Pressure (0.8-1.2)Mpa Air Consumption >2.2m3/min Total Power 37.71KW Pocket Spring Machine Power 30KW Pocket Spring Assembler Power 7.71KW Spring Height Before Pocketed (160-250)mm Spring Height After Pocketed (120-210)mm Wire Diameter (Φ1.8-Φ2.3)mm End-Coil Diameter (Φ52-Φ70)mm Mid-Coil Diameter (Φ55-Φ70)mm Non-Woven Fabric Width For Pocketing (400-520)mm Non-Woven Fabric Thickness ≥70g/m² Gluing Unit Width ≤2100mm Non-Woven Fabric Width For Assembling (700-2100)mm Outer Diameter Of Non-Woven Fabric Reel For Assembling ≤1000mm, height≤150Kg