Autolack (1K Grundierfüller-Polyester Putty) -au

car paint (1K Primer Surfacer-Polyester Putty) -auto paint,auto paint,spray paint,putty,surface,coating - Features Dry fast,esay sanding,single-component intermediate paint,use convenient, Good inter-coat adhesion,good filling,good hide power, is easy to fill small scratch marks, pinholes and surface flaws.easy to sandQ-608 in red, Q608 in gray,Q-608 in yellow are available. Applicable base materials Thoroughly sand and intact existing layer surface, (Original paint and completely dry 2K paint paint and putty surface). Inapplicable base materials Aluminum and stainless steel \ plastic \ galvanized steel and wood. Mixing ratio Q-608 Single-component Filler; QX-1 Thinner=1:0.8 1 Application method spread with putty knife Applying layers 2-3 layers, 15-25μm in total Interval 5-10 minutes, 20 Spraying and applying tool Geocentric spray gun (upper bottle) 1.4-1.6mm; 3-5kg/cm2 Spraying air pressure Suction spray gun (lower bottle) 1.3-1.8mm; 3-5kg/cm2 Curing time (can sand) 20 30 minutes Reapplication After curing and Sanding, re-coat the top coat of our company. Storage life Store for more than two years keep in original container at 20. Packaging 1L canned.