Auto schützen film_ Invisible Auto clothes_static fil

1)Product name: car protect film_ Invisible car clothes_static film2)Composition: PVC transparent body,glue,3)Specification: 10CM*30M, 15CM*30M,30CM*30M ,0.914M*30M,1.27*30M,1.52M*30M ,4)Temperature range:80degree to blow zero 60degree.5)Relative viscosity:HSE-high, LSE- The impact of low water-2-4Mpa.6)cratch-resistant Features: Expansion rate of more than 200%,prevent a rock hit, ,scratch-resistant foreign body, can improve the ability to defend heat ,cold and anti-aging, high ability of anti-chemical corrosion ,UV protection,not change to yellow, not changing color, flexibility and high posts Service is good,beautiful, strong reduction, glue can be removed without leaving adhesive residue.7)Product useage:1,To be protect film, Mainly used in paint protection for any color of paint, 10 wire, 15wire, 20 wire thickness, and has superior toughness, will not break, scratch resistance, mainly to protect parts of the car grill body paint surface, to avoid falling off, and prevent aging of yellow paint and surface rust and so on, its excellent extensibility, transparency and surface adaptation, installation does not affect the body after the appearance of paste. (Posted on the threshold of office on and off to prevent scratches on the paint wear, affixed to the car hood to prevent gravel and dust on thepaint of the damage.) Notes: shell can also be used to protect electronic products, such as mobile computers upper and lower lid senior furniture, sports equipment, the medical aviation instruments, meters and protection purposes.2: Used to prevent dirty film, mainly for automotive interior and door protection of protect film products with high ductility, high plasticity, abrasion resistance and scratch resistance, anti-dirt, anti-UV, anti-oxidation effect. The interior market is generally light-colored car, bad planning vulnerable to friction,and the shoes and rub in the dirt with colored decoration on the inside door and difficult to clean,if use aprotective film, not only to protect the decorating, but also beautiful and easy to clean increase, saving carespending.OEM Service Protection for car special door bowl or vehicles according to customer requirements tailoredstyle. we doOEM service Attachment: rhino skin protective film8) Use mathod : 1. A clean surface before pasting, better use non-detergent oil or 75% alcohol to handle it,wash, dried in the air (for already scratching surface, use a little wax to treat the surface is better);2. torn off the protect film bottom of paper ,use liquor or alcohol with dilute water sprayers, evenly sprayed asmall amount of fog on the plastic surfaces and to paste in place (especially concave)3. rhinoceros hide glue to the concave surface close to move around up and down, adjust, on the positiveposition;4. 2 thumb pressed rhino skin surface, into a "one" to both sides of the advancing slowly, squeezing thewater;5. rhinoceros skin middle fingers pressed flat surface, push up, squeeze the water, if cocked to or wrinkles,slightly heated with hot hair, you can also heal; Similarly pushed down flat;6. paste finished within 24 hours best not to wash vehicles.