Auto-Kraftstoffeinspritz Tester & cleaner LG-B600

Testing Items and instruction: 1. Ultrasonic cleaning clean the injector needle valve. 2. Idling Test 750 revs/min simulate injectors working state and distributive value as engine is idling. 3. Medium speed test 4000revs/min simulate injectors working state and distributive value as engine is in Medium speed. 4. High speed test 7500revs/min simulate injectors working state and distributive value as engine is in highspeed. 5. Accelerating speed test simulate injectors working state and distributive value as engine is in acceleration.l 6. Shifting test simulate injectors working state and distributive value as engine is in continous states of idling / medium speed / high speed / acceleration. 7. Leaking detecting 0.3 Mpacheck if there was a leaking in case of 0.3 Mpa. 8. Preset for idling speed Injecting times (0-9900 times) simulate injectors working state and distributive value as engine is in idling speed and a defined times. 9. Preset for Medium speed Injecting times ( 0-9900 times) simulate injectors working state and distributive value as engine is in medium speed and a defined times. 10. Preset for high speed Injecting times ( 0-9900 times) simulate injectors working state and distributive value as engine is in high speed and a defined times. 11. Reverse Flushing Flushing the injector inversely and eliminate the impurity. 12. No-dismantled cleaningCleaning the oil system and accessories to eliminate the impurity and c-deposit 13. Unit info Serial number and date of production. Technical parameter: Simulation of turning speed:0-7500r/minTesting counter:9900 step length 100Pulse width:0-20.0ms step length 0.1msTiming measurement:0-20min (adjustment)Pressure of system:0-0.6Mpa (adjustment)Oil tank capacity:2000mlUltrasonic cleaning power:70WUltrasonic cleaning frequency:28KHZMeasuring cylinder capacity:140mlMeasuring cylinder precision:2mlPower supply:AC 100-220V 50/60HZ