Auto Fuel Injector Tester und Reiniger

Testing Items and Instruction: 1.Ultrasonic Cleaning Clean the injector needle valve.2.Idling Test 750 revs/min Simulate injectors working state and distributive value as engine is idling.3.Medium Speed Test 4000revs/min Simulate injectors working state and distributive value as engine is in medium speed.4.High Speed Test 7500 revs/min Simulate injectors working state and distributive value as engine is in high speed.5.Accelerating Speed Test Simulate injectors working state and distributive value as engine is in acceleration.6.Shifting Test Simulate injectors working state and distributive value as engine is in continuous states of idling/medium speed/high speed/acceleration.7.Leaking Detecting 0.3MpaCheck if there was a leaking in case of 0.3Mpa.8.Preset for Idling Speed Injecting Times (0-9900times) Simulate injectors working state and distributive value in idling speed and a defined times.9.No-Dismantled Cleaning Cleaning the oil system and accessories to eliminate the impurity and c-deposit.10.Simulate Test Touch simulate item to enter the simulate signal function. You can switch to pulse signal function by touching pulse signal item on top right corner to enter pulse signal working interface. Touch back to main menu.11.Pulse Test Touch pulse item to enter the pulse signal function. You can switch to simulate signal function by touching simulate signal item on top right corner to enter simulate signal working interface. Touch back to main menu.Technical parameter: Range of turning speed:7500r/min Pulse width by counting:9900 step length 100 PWM:20.0ms step length 0.1ms Timing measurement: 20mins(adjustment) Pressure of system: 0.6Mpa(adjustment) Power supply:AC220V±10 50/60Hz Oil tank capacity:2000 ml Ultrasonic cleaning power:70Wintermittent Ultrasonic cleaning frequency:28KHZ±0.5 KHZ Measuring cylinder capacity:140ml Measuring cylinder precision:2ml Output scope of the stimulant signals:0 +5V Output scope of pulsed signals:+5V +12V Features: 1. It is initiated that the unit is operated by touch screen and LCD with Chinese characters. 2. 6 lines simulated input signals are used for the sensor of simulate input. 3. 2 lines pulsed input signals are used for the sensor of simulate input. 4. 8 lines input signals instead of sensor test the computer of automobile to find out the fault of sensor. 5. 16 kinds testing & cleaning functions for fuel injector.