Auto Ätzmaschine für Scheren

Technical parameters Kinko CPU306 microcomputer control: 16 bits Eview MT506S colour touch screen: 5.7 256 colours Power supply: AC220V Total power: 400W Max marking output power (dual power output): 320W Max marking output current: 21.8A Marking current, AC: 025V Power consumption, static: less than30W Marking timing range: 0.15s Marking frequency counting range: 1200000 Stencil counter range: 110000 Marking liquid supply counting range: 1-100000 Marking liquid flow rate0.01ml -10ml (depending on the time) Max marking amount (when marking time is 0.8s): abt.3000pcs/hour Length of shear bladefor different equipment, the length is different:less than100mm Air pressure: 0.21Mpa Features 1. Kinko CPU306 24 dots 16bits microcomputer control, programmable program controller, high integration, high marking precision, accurate marking time by milliseconds. 2. Clear and easy operation from Eview MT506T 256 colours, 5.7STN touch screen 3. A high precision industrial stabilizer is provided free. 4. A main control circuit board is allocated, it can help restoring production after trouble. 5. pushing the shear blades by hand. 6.Automatic collection of the shear blades. 7. Performances of the equipment can be controlled owing to the complete alarm information, such as over-voltage alarm, over-current alarm, etc. 8. Ejecting plate can push the shear blades in to the accurate marking position without manual adjustment. 9. Many kinds of shear blades can be marked only by replacing the pushing board, storage bin and ejecting plate. 10. Double-power output for (1) the smooth large power output and (2) the reduction of power part burden and (3) the easy maintenance of power parts; 11. A start protection circuit for the main board of marking interface to avoid the high pulse into the circuit system of the marking machine when it starts; 12. The exclusive stencil can avoid adherence between stencil and workpiece, thereby influence the ejecting plate.