Aufblasbare Profilpressmaschine

The main technique parameters: 1, the pressure head, motor: Y100L - 4/8 1.5/0.8 kw 2 and tread pressure and motor: Y90S - 4 1.5 kw Instructions: Close total switch QS processing power. This time also connect gas source, the tire body on tire body lifts, rotating cylinder valve lift tire body, let tire body rises. Manual clamping handwheel, adjust the tire body position to appropriate, then manual carcass clamping valve, the clamping tire body. Open ended at carcass inflatable cut-off valve, let air directly into the carcass. To 0.2 0.3 Mpa, close the valve after decompression, open loop, and let tire body always maintain in this pressure (if overpressure, relief valve, pressure). Twist QS1 button (let operates under the pressure head motionless, can be manual also KeJiao trample) according to SB7 button, compaction tire edge. Twist the pressure head pressure cylinders, let the pressure head pressure tire body, some dynamic pressure head, reverse slow press fit, basic planish, then press the button, let SB2 high-speed rotating, until the pressure head pressure and good so far. Then according to the working conditions, unload tire body back to work.