ASTM B265 Titanblech

Titanium sheet Thickness: 0.3 60mm, Width: 2000mm max ASTM B265, ISO 9001:2000 Hot rolled & Cold rolled Delivery in advance accepted Titanium sheet: 1. Material: CP titanium and titanium alloy, Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr10, Gr11, Gr12, Gr17, Gr19, Gr23 Descriptions: Cp grade 1 can be used in the deep drawing parts for its good elongation and excellent corrosion-resistance. Cp grade 2 is used the most widely in the commercially pure titanium. Cp grade 3 is almost only used in pressure vessel. Cp grade 4 can be used in some fitting parts and fastening pieces, but for complex shape need 300 degree celsius to form. Alloy grade 5, Ti-6Al-4V, is the most widely used in the titanium alloys because of its comprehensive mechanical, physical and chemical properties. Alloy grade 7, add little palladium in cp titanium and it has the most excellent corrosion-resistance. Of course it costs higher. Alloy grade 9, Ti-3Al-2.5V, is the most widely used in the golf clubs and bicycle girders. Alloy grade 12, it has the similar properties with the grade 7 but costs less. Alloy grade 23, Ti-6Al-4V ELI(Extra Low Interstitial) can be used in the medical appliance. Standard: ASTM B337, ASTM B338, ASME SB337, ASME SB338, ASTM F67, ASTM F136 AMS JIS 2. Certificate: International Quality Management System ISO 9001:2000 SGS No Including Heavy Metal 3.Specifications: The minimum thickness is 0.3mm, and max can reach 60mm. The width can reach to 2000mm, but it related to the thickness, if the thickness is too small, the width can not reach 2000 4.All the titanium plates are the material by titanium sponge made in Zunyi, Guizhou Province, which is very famous for its titanium sponge product. 5.The third praty test is accepted. And the certificates and documents requested by customers will be provided. 6.General Information of the Titanium Plates: GradesTechnologyStatusSpecifications(mm)ThicknessWidthLengthGr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr10, Gr11, Gr12, Gr19, Gr23, A1Hot rolledRM>4.75 60.0400 30001000 4000Cold rolledYMST0.30 6.0400 10001000 3000TB2 (Ti-5Mo-5V-3Cr-3Al)Hot rolledST>4.0 10.0400 30001000 4000Cold rolledST1.0 4.0400 10001000 3000TB5, TB6, TB8Cold rolledST0.30 4.75400 10001000 3000Note: The minimum thickness of CP titanium plates is 0.3mm. The requests for other sizes are acceptable. 7.Allowable Deviation of Thickness(mm): Header: Width-W; Allowable Deviation of Thickness-- AD; Thickness-T T-AD-W400 1000>1000 2000>2000 0.3 0.5±0.05————>0.5 0.8±0.07————0.8 1.1±0.09————>1.1 1.5±0.11————>1.5 2.0±0.15————>2.0 3.0±0.18————>3.0 4.0±0.22————>4.0 6.0±0.35±0.40——>6.0 8.0±0.40±0.60±0.80>8.0 10.0±0.50±0.60±0.80>10.0 15.0±0.70±0.80±1.00>15.0 20.0±0.70±0.90±1.10>20.0 30.0±0.90±1.00±1.20>30.0 40.0±1.10±1.20±1.50>40.0 50.0±1.20±1.50±2.00>50.0 60.0±1.60±2.00±2.50