Anshi Subscriber Terminal Block Module

The STB module provide a connection point between an exchange-side cable pair and a distribution pair. It incorporates a 5-point plug in module to provide continuity and a range of other options. Removal of the plug-in module does not disturb wire connections but makes contacts to them available for testing of both sides of the network. It is especially recommended for: 1. Outdoor connections where the enviromental conditions are extremely agressive. 2. Terminations where user development characteristics require future flexibility in terms of the type of protection or filtering capabilities. Current conducting capacity 20 A, 10 A per conductor for 10 minutes at least, without causing deformation to the module Insulation resistance Dry atmosphere: >1010 Damp atmosphere(ASTM D618, procedure F): >1010 Salt fog:(ASTM B117) >109 Immersion in water: (15 days in 3% NaCl solution) TELCORDIA TR-NWT-000975 (Formerly Bellcore)>109 Contact resistanceRmaterial + Rbridge contacts + Rwire contacts <10 m Increase in contact resistanceAfter climatic tests: <2.5 m After 50 reinsertions: <2.5 m Dielectric strength >3,000 Vdc for 1 minute Mechanical characteristics Protector ground contactTinned hard brass Continuity contactTinned hard brass Plug-in module bodyFlame retardant (UL94) fiber-glass reinforced polycarbonate Plug-in module sealantGel O ring EPDM Internal ConfigurationContinuityASSTB 260 V GDT230 V GDTAS-STB-PSize: (mm) (H x W x D): 46 x 50 x 20 (with Protection) Environment condition: 5-40 degree Celsius ,Relative humidity <85% (+30 degree Celsius),Atmospheric pressure: 70-106KPa Pulling-out force: tin bronze and silver plating (20-40uinch), pulling-out force not less than 25N The performance of anti-burn: PBT or anti-burn PC ,Combustibility achieved GB/T 5169.7-1985 standard Type: 1) without Protection: DIN rail drop wire connector with continuity plug. The plug is grey in colour and has only the function of electrically connecting the incoming pair with the outgoing one. 2) with Protection: DIN rail drop wire connector with 3-point protection: It differs from previous one by having a RED plug, which, beside providing continuity, also integrates a 3-pole gas arrestor (GDT), rated 230V, 5A/5kA Life: durability 200 cycles (0.4-0.6 diameter), durability 50 cycles (0.6-1.2 diameter) Testing-generalElectricalMechanicalEnvironmental and so onaccording to industry standard Material and Production Stamp and Product Branding: according to Client standardScope of supply : Dropwire module filled with polymerPrimary protection holder3-electrode arrester with failsafe(FS)Installation instructionsDrop wire connector module Subscriber terminal block STB module ANSHI Disconnection Module STB module with protectionDrop Wire Module Subscriber Terminal Block Insulation Displacement Connection Disconnection Module Quick Connect Module ANSHI Subscriber terminal block Drop wire module