Amorphe Verteilung Transformatoren

As the transformer adopt for the city and rural distribution network. It's iron-core is amorphous strip material, the no-load loss is 75% less than S9 transformer and the LV winding is copper winding, which would increase the short-circuit bearing ability. The vectory group is Dyn11, which would reduce the effect to the harmonic wave and improve the power supply quality. Before shipment every transformer have done full-wave lightning impulse test at a voltage 25% higher than national standard to insure the transformer in motion safely.As amorphous Distribution transformer can't bear mechanical force, and rectangle winding's mechanical intensity is week, it is a big difficulty for amorphous distribution transformer pass the short-circuit test, our company has captured this difficulty, exploited SBH16-M-2500/10 distribution transformer, it has passed the short-circuit test in ShenYang National Transformer Quality Supervision Testing Center. It demonstrates that our company's amorphous distribution design has came to the international advanced level.Functional characteristics Vecor Group: Dyn11 Impedance Voltage (%): 4%, 4.5%, 5% Rated voltage: H. V: 11, 10.5, 10, 6.3, 6KV (Or as customer requirement) L. V.: 0.4 KV (Or as customer requirement) Tapping range: +/- 2 * 2.5%, +3*2.5%, -1*2.55(Or as customer requirement)Frequency: 50Hz Number of phases: 3 Cooling method: ONAN or ONFN Standards: GB1094 Power transformer JB/T10318-2002 Technical data & requirement of amorphous alloy oil immersed distribution transformer IEC60076 Power transformerService conditions The height above the sea level is below 1000m Ambient temperature Highest air temperature +40º C Highest daily average air temperature +30º C Highest annual average air temperature+20º C Lowest outdoor air temperature -25º C Scope of application Suitable for outdoor city and rural distribution network Max voltage effective valueVoltageRate Shortcircuit Frequency withstand voltage virtual valueRated Thunder and Lightning Impulse Withstand Voltage Peak P value≤1.1 6.9 11.5 23≤1 6 10 205 25 35 55… 75 95 125