Aluminum Alloy Rod & Drahtziehmaschine

§ Equipment use This wire drawing machine is used to draw aluminum & alloy wires from rod.§ Equipment features1.In horizontal and tandem construction, modular combination simplifying the equipment on assembly and installation. 2.Driven by double motors to realize fast die-change. 3.Witha helical gear transmission of high efficiency with low noise. 4.A fully immerging emulsion system to ensure an effective cooling and lubricating for wire and dies. 5. With an unique guiding wire mechanism to ensure the drawing quality of wires. 6. Automatic dual take-up to realize a high degree of automation and a high efficiency. § Equipment compositionThislineis composed of pay-off stand, main drawing machine, wire accumulator, dual take-up, wire pointer and stripper, electric control system, etc.§ Technical Data LHD-450/13 Aluminum & Alloy Rod Wire Drawing MachineLHD-450/11 Aluminum Rod Wire Drawing MachineMain MachineInlet Wire dia.Alloy Φ9.5mm,Al Φ9.5mm (Φ12mm)Φ9.5mm (Φ12mm)Out Wire dia.AlloyΦ2.1 4.5mm,AlΦ1.90 4.8mmΦ4.8 2.10mmMax. Linear speedAlloy 20m/s, Al25m/s22m/sMax. Drawing Pass1311Finish Capstan Dia.Φ450mmΦ450mmSpeed ratio between capstans1.238(1.241)1.3 1.10Max. Dies sizeΦ54×38mmΦ54×38mmMain motor315kW(DC)200kW(DC)Finish capstan motor75kW(DC)55kW(DC)AccumulatorAccumulating wire length5.0m5.0mAccumulated wire tension400N400NDual take-upMax. take-up speed25m/s25m/sMax. traversing pitch6mm/r6mm/rTake-up motor power22×2kW(DC)22×2kW(DC)Take-up bobbinsPND500-630(DIN46397)PND500-630(DIN46397)OthersTotal weight40t36.2tOverall dimension23.22×4.4×5 m23.22×4.4×5 m