Aluminium-Trennzeichen für Auto-Klimaanlagen

Aluminum separator for automobile air-conditioners Instruction: The gas-liquid separator for automobile air-conditioners is an important component part of the automobile air-conditioning system. It is installed between the evaporator and the compressor. Besides the functions of drying reservoir, it has plays the role of gas-liquid separating and protecting the compressor. The gas-liquid separator is at the low voltage end of the system. The refrigeration substances flow out of the evaporator, then into the inlet of the gas-liquid separator, then after the gas-liquid separating, the gaseous substances go into the compressor through the outlet. The working conditions: generally, temperature is 80 ° C, pressure range is 0.01 - 1.2MPa. Suitable medium: R12 and R134a. The technical parameters: according to QC/T661, the gas-liquid separator is suitable for car air conditioning (HFC-134a). Specifications: The gas-liquid separator for automobile air-conditioners, made of aluminum, primarily suitable for the GM, VLOVE; Main parameters: Height: 185 235mm; Diameter: Φ89 mm; Interface thread: 1 1/16-16UNS1 1/16-14UNSM27×2; LV filling mouth; Pressure switch blocks: 7/16-20UNF, M12 x 1.5; Volume: 800 1300ml; Water absorption capacity: 15-20g; Notes: Users can set the connectors, filling mouth, pressure switch blocks in different locations according to their own demands, and can choose different kinds of length and interface threads in order to meet their design requirements. Installation location and some notice: When installing the product, the directions can not be exchanged, and the poducts should be fixed with holders or hoops. Order notice: Customers can choose different models according to the provided information, if there is a special request, please provide the special content.