600kg Vacuum Induction Melt und Erstarrungs Pelz

Quantity specification 1 Chambers composition: Melting chamber: Vertical chamber 2600mm(Φ)×3000mm(H) Water-cooling jacket structure Cooling chamber: Horizontalchamber 2300mm(W)×2300mm(H) Water-cooling jacket structure The parts of chambers are surrounded with water-cooling tubes. 2 Heater type: Induction coil 3 Melting temperature:1600°C (max operating temperature) 1450±50°C (normal operating temperature) 4 Melting time: About 60 minutes 5 Ultimate vacuum: Below 0.4Pa (melting chamber) 6 Operating vacuum: 1-80kPa (melting chamber) 7 Water-cooling drum: 610mm(Φ)×590mm(W) Copper alloy outer bush: 30mm(T) 8Water-cooling rotary table: 2058mm(Φ)×230mm(H) 9 Electrical capacity:3 phase 50Hz 720kVA (melting power) 3 phase 50Hz 150kVA(operating power) Features: 1 Constant pouring and casting 2 Water-cooling copper alloydrum 3 Uniform casting flakes Other Vacuum Induction Melt and Solidification Furnace Type: 300kg Vacuum Induction Melt and Solidification Furnace Brand Name: CNVAC Model Number: VI-300SC Load capacity: 300kg(Net weight) Raw material: Fe-base alloy or Ni-base alloy Heating mode: Electromagnetic heating 200kg Vacuum Induction Melt and Solidification Furnace Brand Name: CNVAC Model Number: VI-200SC Load capacity: 200kg(Net weight) Raw material: Fe-base alloy or Ni-base alloy Heating mode: Electromagnetic heating