55 "Mechanical Reifen Formen und Härten Press

This Curing Press is appliable for curing TBR,LTR and bias tyres with Nitrogen or steam as curing medium. This Curing Press is a Mechanical type, the beam moves vertically and horizontally for tyre loading and unloading. The center mechanism is BOM type and the curing mould is heated by Platen.Other features: Single- or Dual-Column Vertical Chuck Loader, Dual-Cylinder Unloading Device, Pro-Bar Style Mould Stripping Unit.As per customer's request, Auto-Adjusting Device, SMO Drive Device, PCI and Green Tyre Holder are available. Curing Piple can also be made into order. This Curing Press uses PLC for real-time control, and industrial PC for Human-Machine Operation Interface.All parameters can be re-set during Curing Cycle, and real-time data collection/preservation,alarming,as well as data back dating can also be realized through this system. With ethernet interface,Curing Press group-management is available. Brief Technical Parameters:1 Type of Cured Tire Common and Radial Tire2 Heating Type Platen3 Number of Mould 24 Type of Center Mechanism BOM5 I.D. of Mould Shield 1360mm6 Max. Mould closing force 2890kN X 27 Height of Mould 300-560mm8 Max Mould Weight 6500kgs9 Diameter of Bead 17-2410 Max. Height of Green Tire 750mm11 Max. OD of Cured Tire Two-piece Mold 1070mmSegmental Mold 1000mm12 Max.Section Width of Cured Tire 360mm13 Designed Mould Open/Close time 60s14 Max Load of VCL 100kgs15 Max External Pressure 1.4Mpa16 Max.Internal Pressure 2.8Mpa17 Hydraulic Water Pressure 2.1-2.5Mpa18 Compressed Air Pressure 0.7Mpa19 Control Air Pressure 0.35Mpa * Our Curing Press range is from 40.5" to 125".